Initial Code Submit

QR_Reader/.theia/launch.json

@@ -0,0 +1,8 @@
+{
+  // Use IntelliSense to learn about possible attributes.
+  // Hover to view descriptions of existing attributes.
+  "version": "0.2.0",
+  "configurations": [
+    
+  ]
+}

QR_Reader/QR_Reader.ino

@@ -0,0 +1,12 @@
+
+
+void setup() {
+  // put your setup code here, to run once:
+
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+
+}
+

QR_Reader/QrReader.h

@@ -0,0 +1,96 @@
+#ifndef QrReader_h
+#define QrReader_h
+
+#define QRHead 0x7E00 
+#define QRRead 0x07
+#define QRWrite 0x08
+
+enum lightmode{
+  NO = 0x00,
+  Standard = 0x01,
+  KeepLight = 0x10
+}uint8_t;
+
+enum QRMode{
+  Manual = 0x00,
+  Command = 0x01,
+  Continuous = 0x10,
+  SensingMode = 0x11
+}uint8_t;
+
+enum QRAllBarcodes{
+  DisableAll = 0x00,
+  EnableAll = 0x01,
+  EnableDefault = 0x11
+}uint8_t;
+
+enum QRBaud{
+  Rate1200 = 0x09C4,
+  Rate4800 = 0x0271,
+  Rate9600 = 0x0139,
+  Rate14400 = 0x00D0,    
+  Rate19200 = 0x009C,
+  Rate38400 = 0x004E,
+  Rate57600 = 0x0034,
+  Rate115200 = 0x001A
+}uint16_t;
+
+enum QRCode{
+  EAN13 = 0x002E,
+  EAN8 = 0x002F,
+  UPCA = 0x0030,
+  UPCE0 = 0x0031,
+  UPCE1 = 0x0032,
+  Code128 = 0x0033,
+  Code39 = 0x0036,
+  Code93 = 0x0039,
+  CodeBar = 0x003C,
+  QRCode = 0x003F,
+  Interleaved2of5 = 0x0040,
+  Industerial25 = 0x0043,
+  Matrix2of5 = 0x0046,
+  Code11 = 0x0049,
+  MSI = 0x004C,
+  RSS_14 = 0x004F,
+  LimitedRSS = 0x0050,
+  DM = 0x0054,
+  PDF417 = 0x0055
+}uint16_t;
+
+struct datastruct{
+  uint16_t Head;
+  uint8_t type;
+  uint8_t Lenght;
+  uint16_t Address;
+  uint8_t data[256];
+  uint16_t CRC;
+};
+
+union dataUnion{
+  datastruct data;
+  uint8_t dataarray[264];
+}ComData;
+
+class qrScanner{
+
+  public:
+    void SetBasicSetting(bool LEDIndication, bool silence, lightmode tragetLighting, lightmode LightingMode,  QRMode ScannerMode);
+    void enableScanning(bool enable);
+    void SetImageStabilisation(uint8_t Time);
+    void setScanningIntervalTime(uint8_t Interval);
+    void setAutoSleepSettings(bool Enable, uint16_t IdleTime);
+    void setWarningToneSettings(uint8_t Frequency,uint8_t Duration);
+    void setSensitvity(uint8_t Sensitivity1, uint8_t Sensitivity2);
+    void setExposure(uint16_t Exposure);
+    void setDelyfSameCode(bool enable, uint8_t Delay);
+    void setTimefDataoutput(uint8_t Time);
+    void SetBaudRate(QRBaud rate);
+    void setScanSettings(bool ScanCenter, bool enableAllBarcodes);
+    void EnableCodeType(bool enable, QRCode code, uint8_t minLength, uint8_t maxLength);
+
+  private:
+
+}
+
+
+#endif